|
|
Products
| Condensate Pump |
|---|
 Description: Hartell - Condensate is produced at a rate of up to a gallon per hour by a residential central air conditioning unit or gas condensing furnace. The installer will feed the condensate from the appliance drain into one of the pumps inlet ports. Hartell condensate pumps are equipped to connect with 3/8" ID plastic tubing. The tubing is connected to the pump check valve, leading to a drain line, sump, French drain or laundry sink.
The "Lift" or "Head" of the pump refers to the height the pump is required to "lift" the water up to the drain. The distance the water needs to travel horizontally once the lift is achieved is referred to as the "Run". The "run" does not effect the lift or flow rate of the pump unless it exceeds 50 feet. "Runs" of 50' or more will decrease pump output by about 10%.
Hartell condensate pumps are perfect for use as wastewater drain pumps for icemakers, beverage dispensers, drinking fountains, water coolers and dehumidifiers.
AUXILIARY SAFETY SWITCH (in Accessories section)
Hartell strongly recommends that all installations include a properly wired auxiliary safety switch. The auxiliary safety switch will shut down the appliance in the event of a pump overflow condition that could lead to property damage. Pump overflow can be caused by a blocked discharge line, power loss to the pump, or pump malfunction. The switch can be wired in-line with the thermostat to shut down the appliance; or wired directly to an alarm. Hartell models followed by the letter �X� include the auxiliary safety switch.
|
| SKU | KT-15X-2UL |
|---|
| Size | 9.25"W x 5.5"D x 8.25"H | | Weight | 6 | | Details | Hartell - The KT-15 series condensate pumps lead the industry in quality and economy! The KT-15 is perfect for the majority of residential condensate pump applications. Properly installed, the KT-15 will provide years of trouble free service. 230v 1Phase. Includes:
AUX. SWITCH, A MUST!!,
ABS Plastic Reservoir,
Thermally Protected, High Torque Motor With S.S. SHAFT,
Built-in Full Flow Check Valve for 3/8" ID Plastic Tubing,
6' Ppower Cord With Molded Plug (NEMA 5-15P or 6-15P),
12 Month Warranty ,
Maximum Lift is 15',
3 Qt. Reservoir,
2 Inlet sizes - 1- 1" & 1 - 3/8"
| | Price | $54.25 | | Desired Qty |
| | SKU | KL-20X-2UL |
|---|
| Size | 9.25" X 5.5" X 5.25 | | Weight | 6 | | Details | Hartell - KL-20 series condensate pumps provide the features of the KT series pumps in a low profile design. This allows installations where adequate space is not present for a standard size pump. The low inlet port allows gravity drainage from "90 plus" furnaces or other appliances with a low condensate drain.230v 1 Phase. ABS PLASTIC RESERVOIR THERMALLY PROTECTED, MOTOR WITH 300 SERIES S.S. SHAFT INLET HEIGHT 12" IDEAL FOR CONDENSING FURNACES OR APPLIANCES WITH LOW CONDENSATE DRAINS BUILT-IN FULL FLOW CHECK VALVE FOR 3/8" ID PLASTIC TUBING 6' POWER CORD WITH MOLDED PLUG (NEMA 5-15P or 6-15P) 18 Feet Maximum Lift. | | Price | $83.25 | | Desired Qty |
| | SKU | PAB3X-1 |
|---|
| Size | 9.25" X 6.0" X 9.75 | | Weight | 7 | | Details | Hartell - The PAB3 series is the ideal pump for heavy-duty residential and commercial applications. With a full one gallon reservoir, aluminum reservoir cover and enclosed 3.3" motor frame, the PAB3 is a true workhorse! The PAB3 carries a three year limited warranty, longer than any other condensate pump on the market. 115v 1 Phase.
Includes:
AUX. SWITCH. A MUST!!,
ABS Plastic Reservoir, Thermally Protected, 3.3" Motor With 300 Series S.S. Shaft, Built-in Full Flow Check Valve For 3/8" ID Plastic Tubing, 6' Power Cord With Molded Plug, (NEMA 5-15P or 6-15P) 3 Inlets - 1-1/8", 1- 3/8" & Optional Bottom 1" FNPT. 1 Gallon Reservoir Capacity. Maximum Lift 22'. | | Price | $77.25 | | Desired Qty |
| | SKU | KT3X-2UL |
|---|
| Size | 9.25" X 5.5" X 8.5 | | Weight | 6 | | Details | Hartell - KT3 series condensate pumps are the industries quality leader, with the only three-year warranty available! Our cam-activated switch/float design empties twice the amount of water per cycle than other pumps on the market. The KT3 cycles less, equating to longer pump life! Our high torque motor breaks free any algae or scale that may develop in the pump during the off-season, assuring start-up at the beginning of the season! 230v 1 Phase.. Includes: AUX. SWITCH, A MUST!!, ABS Plastic Reservoir, Thermally Protected, High Torque Motor With S.S. SHAFT, Built-in Full Flow Check Valve for 3/8" ID Plastic Tubing, 6' Ppower Cord With Molded Plug (NEMA 5-15P or 6-15P), 3yr. Warranty , Maximum Lift is 18.5', 3 Qt. Reservoir, 2 Inlet sizes - 1- 1" & 1 - 3/8" | | Price | $65.50 | | Desired Qty |
| | SKU | KT-3X-1UL |
|---|
| Size | *9.25" X 5.5" X 8.5" | | Weight | 6 | | Details | Hartell - KT3 series condensate pumps are the industries quality leader, with the only three-year warranty available! Our cam-activated switch/float design empties twice the amount of water per cycle than other pumps on the market. The KT3 cycles less, equating to longer pump life! Our high torque motor breaks free any algae or scale that may develop in the pump during the off-season, assuring start-up at the beginning of the season! 115v 1 Phase..
Includes:
Includes: AUX. SWITCH, A MUST!!, ABS Plastic Reservoir, Thermally Protected, High Torque Motor With S.S. SHAFT, Built-in Full Flow Check Valve for 3/8" ID Plastic Tubing, 6' Ppower Cord With Molded Plug (NEMA 5-15P or 6-15P), 3yr. Warranty , Maximum Lift is 18.5', 3 Qt. Reservoir, 2 Inlet sizes - 1- 1" & 1 - 3/8" | | Price | $48.75 | | Desired Qty |
| | SKU | KL-20X-1UL |
|---|
| Size | 9.25" X 5.5" X 5.25 | | Weight | 6 | | Details | Hartell - KL-20 series condensate pumps provide the features of the KT series pumps in a low profile design. This allows installations where adequate space is not present for a standard size pump. The low inlet port allows gravity drainage from "90 plus" furnaces or other appliances with a low condensate drain.115v 1 Phase. ABS PLASTIC RESERVOIR
THERMALLY PROTECTED, MOTOR WITH 300 SERIES S.S. SHAFT
INLET HEIGHT 12" IDEAL FOR CONDENSING FURNACES OR APPLIANCES WITH LOW CONDENSATE DRAINS
BUILT-IN FULL FLOW CHECK VALVE FOR 3/8" ID PLASTIC TUBING
6' POWER CORD WITH MOLDED PLUG (NEMA 5-15P or 6-15P) 18 Feet Maximum Lift.
| | Price | $81.50 | | Desired Qty |
| | SKU | KT-15X-1UL |
|---|
| Size | 9.25"W x 5.5"D x 8.25"H | | Weight | 6 | | Details | Hartell - The KT-15 series condensate pumps lead the industry in quality and economy! The KT-15 is perfect for the majority of residential condensate pump applications. Properly installed, the KT-15 will provide years of trouble free service.
115v 1Phase.
Includes:
AUX. SWITCH, A MUST!!,
ABS Plastic Reservoir,
Thermally Protected, High Torque Motor With S.S. SHAFT,
Built-in Full Flow Check Valve for 3/8" ID Plastic Tubing,
6' Ppower Cord With Molded Plug (NEMA 5-15P or 6-15P),
12 Month Warranty ,
Maximum Lift is 15',
3 Qt. Reservoir,
2 Inlet sizes - 1- 1" & 1 - 3/8"
| | Price | $41.75 | | Desired Qty |
| | SKU | PAB3X-2 |
|---|
| Size | 9.25"W x 6"D x 9.75"H | | Weight | 6 | | Details | Hartell - The PAB3 series is the ideal pump for heavy-duty residential and commercial applications. With a full one gallon reservoir, aluminum reservoir cover and enclosed 3.3" motor frame, the PAB3 is a true workhorse! The PAB3 carries a three year limited warranty, longer than any other condensate pump on the market.
230v 1 Phase.Includes: AUX. SWITCH. A MUST!!, ABS Plastic Reservoir, Thermally Protected, 3.3" Motor With 300 Series S.S. Shaft, Built-in Full Flow Check Valve For 3/8" ID Plastic Tubing, 6' Power Cord With Molded Plug, (NEMA 5-15P or 6-15P) 3 Inlets - 1-1/8", 1- 3/8" & Optional Bottom 1" FNPT. 1 Gallon Reservoir Capacity. Maximum Lift 22'. | | Price | $91.75 | | Desired Qty |
| | SKU | MS-13X-1 |
|---|
| Size | 5.16"W x 2.44"D x 1.26"H | | Weight | 1 | | Details | Hartell - The Hartell Mini-Split condensate pump is specifically designed for installations with limited space. The ultra slim profile make it ideal for air conditioning systems rated up to 25,000 BTU's. The Pump can be mounted inside the most popular pipe trunking, along side the refrigeration pipe insulation. An LED displays instant visual identification that the unit is operating correctly by indicating if it is in fault or overload condition.
The pump include a low profile SP9 sensor, utilizing the latest Japanese float switch technology. The SP9 uses a non corrosive ferrite ring magnet, giving long trouble free operation in a highly contaminated condensate environment.
The Mini-Split pump comes complete with low voltage alarm contacts and is available in either 115 or 230 volt AC. Hartell's Mini-Split condensate pump is designed and manufactured by our European partner, Sandycott Ltd
115v 1 Phase
Ultra Low Profile: 1-1/4"
LED Diagnostics
Low VOLTAGE SAFETY SWITCH
THERMAL OVERLOAD PROTECTION
6.5 FT SUCTION LIFT
13 FT PUMPING HEAD
32 FT HORIZONTAL RUN SUITABLE FOR EQUIPMENT
COOLING WITH CAPACITIES UP TO 10 kw OR 30,000 BTU
contacts RATED TO 5 AMP
Maximum Lift - 13'. | | Price | $134.95 | | Desired Qty |
| | SKU | MS-13X-2 |
|---|
| Size | 5.16"W x 2.44"D x 1.26"H | | Weight | 1 | | Details | Hartell - The Hartell Mini-Split condensate pump is specifically designed for installations with limited space. The ultra slim profile make it ideal for air conditioning systems rated up to 25,000 BTU\'s. The Pump can be mounted inside the most popular pipe trunking, along side the refrigeration pipe insulation. An LED displays instant visual identification that the unit is operating correctly by indicating if it is in fault or overload condition. The pump include a low profile SP9 sensor, utilizing the latest Japanese float switch technology. The SP9 uses a non corrosive ferrite ring magnet, giving long trouble free operation in a highly contaminated condensate environment. The Mini-Split pump comes complete with low voltage alarm contacts and is available in either 115 or 230 volt AC. Hartell\'s Mini-Split condensate pump is designed and manufactured by our European partner, Sandycott Ltd 230v 1 Phase Ultra Low Profile: 1-1/4\" LED Diagnostics Low VOLTAGE SAFETY SWITCH THERMAL OVERLOAD PROTECTION 6.5 FT SUCTION LIFT 13 FT PUMPING HEAD 32 FT HORIZONTAL RUN SUITABLE FOR EQUIPMENT COOLING WITH CAPACITIES UP TO 10 kw OR 30,000 BTU contacts RATED TO 5 AMP Maximum Lift - 13\'. | | Price | $134.95 | | Desired Qty |
|
| Drain Pan Saftey Switches |
|---|
Description: Hartell - Drain pan safety switch that attaches directly to the condensate drain pan, and can be wired in line with the thermostat to shut down the appliance in the event of a high water level condition in the drain pan.
|
| SKU | J-100 |
|---|
| Size | 8-10\"Long | | Weight | 1 | | Details | Hartell - Drain pan safety switch that attaches directly to the condensate drain pan, and can be wired in line with the thermostat to shut down the appliance in the event of a high water level condition in the drain pan. | | Price | $14.25 | | Desired Qty |
|
| Clear Vinyl Tubing |
|---|
Description: Hartell - 3/8\" OD Clear Vinyl Tubing.
|
| SKU | VT-100 |
|---|
| Size | 3/8" OD x 100 | | Weight | 4 | | Details | Hartell - 3/8"OD Clear Vinyl Tubing. 100' Roll | | Price | $15.95 | | Desired Qty |
|
| Steam Condensate Pump |
|---|
 Description: Hartell - SC-1A high temp, high capacity, & high performance reservoir pump
The SC-1A pumps are designed expressly for automatically returning condensate to a collection point where heat has been added to existing systems below returns.
|
| SKU | SC-1AX-115/230 |
|---|
| Size | 12"W x 12"D x 19" | | Weight | 45 | | Details | Hartell - SC-1A high temp, high capacity, & high performance reservoir pump 1/2hp Motor @ 3450rpm. 115v & 230v. Inlet 1 1/2NPT Female. Discharge 3/4"NPT Female. Resservoir Capacity 4gal. Max. Temp 212º. Auxilary Switch. | | Price | $995.00 | | Desired Qty |
|
| Ice Machine Pumps |
|---|
 Description: Hartell Pumps has been supplying pumps to the ice machine industry for over 40 years! Our high quality replacement ice machine pumps meet or exceed the specifications of the original equipment manufacturer. Hartell replacement ice machine pumps conform to NSF and UL standards, assuring clean. safe, simple and sanitary replacement.
Scotsman
Manitowoc
Ice-O-Matic
Cornelius Uniflow
Crystal Tips
Ross Temp
McQuay Servend
Whirlpool
Frigidaire
Kold-Draft
Carrier
York
Howe
Ice Craft
|
| SKU | GPP-3S-1 |
|---|
| Weight | 6 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture D 115v 1 Phase. 1/2" Discharge.Model# CM250 OEM Part # 12-2260-01
12-2260-21 | | Price | $97.50 | | Desired Qty |
| | SKU | GPP-3RC-1 |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR CORNEILUS/ROSS TEMP ICE MACHINES. Picture 'D'. 115v. 5/8" Discharge. OEM Part# 36526. | | Price | $129.95 | | Desired Qty |
| | SKU | GPP-3RC-4 |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR CORNEILUS/ROSS TEMP ICE MACHINES. Picture 'D'. 230v. 5/8" Discharge. OEM Part# 36527. | | Price | $120.95 | | Desired Qty |
| | SKU | GPP-4RC-1A |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR CORNEILUS/ROSS TEMP ICE MACHINES. Picture 'C'. 115v. 5/8" Discharge. OEM Part# 29797. | | Price | $142.95 | | Desired Qty |
| | SKU | GPP-4RC-2A |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR CORNEILUS/ROSS TEMP ICE MACHINES. Picture 'C'. 230v. 5/8" Discharge. OEM Part# 28175. | | Price | $145.25 | | Desired Qty |
| | SKU | DI-1S-1 |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture E. 115v 3/4" Discharge. Model # HC400, HC400R, HC700, HC800 ,
HC1200, AC30, CM-850. OEM Part#
12-1849-01 , 12-1930-01, 12-2263-01 . | | Price | $141.00 | | Desired Qty |
| | SKU | DI-1S-4 |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture 'E'. 230v. 3/4" Discharge. Model# MMS210, SM205, SCS200, MS410, SMS405, SCS400, HC400, HC400R, HC800, HC1200, CM850, CM1200A,. OEM Part# 12-1849-02, 12-1930-02, 12-2263-02, A29829-001, A30751-022,12-2145-01. | | Price | $141.25 | | Desired Qty |
| | SKU | DI-7S-4A |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture 'E'. 230v. 1" Discharge. Model# CM1200RE, CM1200C, CM1400. OEM Part# 12-2256-02, 12-2256-22. | | Price | $195.00 | | Desired Qty |
| | SKU | GPP-4S-1 |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture D 115v 1 Phase. 3/4" Discharge.Model# CM500 OEM Part # 12-2265-01, 12-2265-21 | | Price | $99.95 | | Desired Qty |
| | SKU | GPP-3S-2 |
|---|
| Weight | 6 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture D. 230v 1 Phase. 1/2" Discharge.Model# CM450 OEM Part # 12-2260-02
12-2260-22 | | Price | $99.95 | | Desired Qty |
| | SKU | GPP-4S-2 |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture D 230v 1 Phase. 3/4" Discharge.Model# CM650 OEM Part # 12-2265-02, 12-2265-22 | | Price | $99.95 | | Desired Qty |
| | SKU | GPP-11S-1A |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR SCOTSMAN ICE MACHINES. Picture 'D'. 115v 3/4" Discharge. Model# MM205, MM210, SC300, SC200,SC100, WT100, MM110, SC500, SM505. Part # 12-0418, 12-418A.
,
| | Price | $143.00 | | Desired Qty |
| | SKU | GPP-3MA-1 |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 115v 1 Phase. 1" Discharge. OEM Part # 8480523/76-2306-3 | | Price | $118.75 | | Desired Qty |
| | SKU | GPP-3MA-2 |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 230v 1 Phase. 1" Discharge. OEM Part # 8480483/76-2268-3 | | Price | $140.75 | | Desired Qty |
| | SKU | GPP-4MA-1 |
|---|
| Size | | | Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 115v 1 Phase. 1/2" Discharge. OEM Part # 8480443
Ice Machine Mod# 200-400 Series. | | Price | $115.95 | | Desired Qty |
| | SKU | GPP-5MA-1 |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 115v 1 Phase. 1/2" Discharge. OEM Part # 1480301 Ice Machine Mod# AO150, 200, 400, 600, ME, MC0500, AM0300, MH0500 | | Price | $106.50 | | Desired Qty |
| | SKU | GPP-5MA-2A |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 230v 1 Phase. 1/2" Discharge. OEM Part # 8480403, 1480311 Ice Machine Mod# CO200, CO400, CO600 | | Price | $121.50 | | Desired Qty |
| | SKU | GPP-8MA-2A |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 230v 1 Phase. 1" Discharge. OEM Part # 1480271, 1480391 Ice Machine Mod# 100 & 200 SERIES, A1100, A2200 | | Price | $117.95 | | Desired Qty |
| | SKU | GPP-10MA-2A |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 230v 1 Phase. 3/4" Double Discharge. OEM Part # 8480453, 8480463 Ice Machine Mod# 100 SERIES, C1100
** Pump includes 3/4" "Y" discharge not shown in picture | | Price | $141.75 | | Desired Qty |
| | SKU | GPP-18MA-1 |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 115v 1 Phase. 1" Discharge. OEM Part # 1480061 Ice Machine Mod# 300 SERIES | | Price | $126.25 | | Desired Qty |
| | SKU | GPP-18MA-2 |
|---|
| Weight | 7 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture C. 230v 1 Phase. 1" Discharge. OEM Part # 1480071 Ice Machine Mod# 500 SERIES | | Price | $134.25 | | Desired Qty |
| | SKU | GRRP-1MA-1 |
|---|
| Weight | 5 | | Details | Hartell - REPLACEMENT PUMPS FOR MANITOWOC ICE MACHINES. Picture F. 115v 1 Phase. 5/8" Discharge. OEM Part # 8480473 Ice Machine Mod# 100 SERIES | | Price | $95.95 | | Desired Qty |
|
| Waste Water Pumps |
|---|
 Description: Hartell - Waste water for sink drain & laundry tray pumps.
|
| SKU | LTA-1 |
|---|
| Size | 7" x 8" x 11" | | Weight | 15 | | Details | Hartell - The LTA pumps are completely self contained units that are easy to connect directly to laundry tray tubs. Lightweight and compact, these models eliminate reservoirs, traps, extra fittings, and costly labor. This pump includes a pressure activated switch that turns on the pump when water enters the tub.
Features
AUTOMATIC PRESSURE SWITCH
ABS HIGH IMPACT CORROSION RESISTANT, PLASTIC CONSTRUCTION
INTEGRAL JUNCTION BOX
8' CORD AND PLUG
MOUNTS DIRECTLY TO SINK TAILPIECE
NO TRAPS REQUIRED
FITS INSIDE 24" BASE CABINETS
FITS UNDER WET BARS, UTILITY SINKS, KITCHENETTES, AND VANITIES
SIMPLE INSTALLATION SAVES TIME
NO MAIN STACK VENT CONNECTION REQUIRED
TAKES UP ZERO FLOOR SPACE
ALLOWS SINK INSTALLATION WITH OUT BREAKING CONCRETE
SPECIFICATIONS LTA
MOTOR: (hp @ rpm) 1/8 @ 1670
ELECTRICAL 115V 2.2A
INLET SIZE 1-½" NPT FEMALE
DISCHARGE SIZE 1" NPT MALE
RESERVOIR CAPACITY DIRECT MOUNT
UNIT DIMENSIONS (WxDxH) 7" x 8" x 11"
MAXIMUM TEMPERATURE 140° F
SEALED RESERVOIR N/A
PUMP PERFORMANCE
LIFT (feet) FLOW (GPM)
.0 27.5
8.0 23.0
12.0 13.0
| | Price | $245.00 | | Desired Qty |
| | SKU | LTS-1 |
|---|
| Size | 10” x 12” x17” | | Weight | 30 | | Details | Hartell - The LTS is a heavy duty pump designed for moving large quantities of water. Used in commercial and industrial air-conditioning systems, large refrigeration units, and multiple unit installations to tie several drains into one disposal pump.
Features
POLYPROPYLENE RESERVOIR
SUDS PROOF RESERVOIR
INTEGRAL JUNCTION BOX
8' CORD AND PLUG
UNITIZED CONSTRUCTION
FITS INSIDE 24" BASE CABINETS
FITS UNDER UTILITY SINKS
ALLOWS SINK INSTALLATION WITH OUT BRAKING CONCRETE
NO MAIN STACK VENT CONNECTION REQUIRED
SPECIFICATIONS
MOTOR: (hp @ rpm) 1/3 @ 1750
ELECTRICAL 115V 5.6A
INLET SIZE 1½” NPT FEMALE
DISCHARGE SIZE 1” NPT FEMALE
RESERVOIR CAPACITY 2 GALLON
UNIT DIMENSIONS (WxDxH) 10” x 12” x17”
MAXIMUM TEMPERATURE 130° F
SEALED RESERVOIR VAPOR SEAL
WEIGHT 30 LBS
PUMP PERFORMANCE
LIFT (feet) FLOW (GPM)
4.0 48.0
8.0 39.5
12.0 26.4
16.0 4.7
| | Price | $399.00 | | Desired Qty |
| | SKU | LTP-1 |
|---|
| Size | 10" x 12" x 17" | | Weight | 25 | | Details | Hartell - The LTP is designed for laundry and wet bar applications. It is primarily used where the sink or appliance is installed below the plumbing drain.
Features
VERTICAL ACTION SWITCH
STRUCTURAL FOAM POLYPROPYLENE RESERVOIR
"SUDS" PROOF RESERVOIR
INTEGRAL JUNCTION BOX 8' CORD AND PLUG
UNITIZED CONSTRUCTION
FITS INSIDE 24" BASE CABINETS
FITS UNDER UTILITY SINKS
ALLOWS SINK INSTALLATION WITH OUT BREAKING CONCRETE
NO MAIN STARK VENTING REQUIRED
SPECIFICATIONS LTP
MOTOR: (hp @ rpm) 1/4 @ 1725
ELECTRICAL 115V 5.0A
INLET SIZE 1" NPT FEMALE
DISCHARGE SIZE 1" NPT FEMALE
RESERVOIR CAPACITY 2 GALLON
UNIT DIMENSIONS (WxDxH) 10" x 12" x 17"
MAXIMUM TEMPERATURE 130° F
SEALED RESERVOIR VAPOR SEAL
PUMP PERFORMANCE
LIFT (feet) FLOW (GPM)
4.0 44.0
8.0 34.5
12.0 7.5
| | Price | $295.00 | | Desired Qty |
|
|
